Cette page est en cours de rédaction.
Apportez votre aide…
Wacom Artpad II, port série.
Compatibilité
Testé sur Kubuntu 8.04 et PC équipé d'une prise série (et non pas via adaptateur série/USB).
[Edit 11-11-2009] Sur Ubuntu 9.10 : - Retirez "screen "Default Screen". - La tablette est reconnue mais fonctionne mal.
Pré-requis
- Disposer des droits d'administration ;
- Disposer d'une connexion à Internet configurée et activée ;
Installation du pilote
Installez les 2 paquets suivants :"wacom-tools" et "xserver-xorg-input-wacom"
sudo apt-get install xserver-xorg-input-wacom wacom-tools
Ou via Synaptic / Adept.
Configuration
Edition du fichier xorg.conf
1) On fait une copie de sécurité :
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.default
2) On edite le fichier : Soit sous Gnome :
gksudo gedit /etc/X11/xorg.conf
Soit sous KDE :
kdesudo kate /etc/X11/xorg.conf
Modification du fichier xorg.conf
1) Section ServerLayout. Trouvez la section "ServerLayout" : Début : Section "ServerLayout" fin : EndSection
Y inserer :
# WACOM ArtPad InputDevice "stylus" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" # For non-LCD tablets only # InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets # InputDevice "touch" "SendCoreEvents" # Only a few TabletPCs support this type # WACOM ArtPad
Si la section n'existe pas, copiez celle-ci :
Section "ServerLayout" Identifier "Default Layout" screen "Default Screen" # WACOM ArtPad II InputDevice "stylus" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" # For non-LCD tablets only # InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets # InputDevice "touch" "SendCoreEvents" # Only a few TabletPCs support this type # WACOM ArtPad EndSection
2) Section Inputdevice. Ajoutez cette section :
# WACOM ArtPad II Section "InputDevice" Driver "wacom" Identifier "stylus" # Option "Device" "/dev/input/wacom" # USB ONLY? Option "Device" "/dev/ttyS0" # SERIAL ONLY Option "Type" "stylus" # Option "ForceDevice" "ISDV4" # Tablet PC ONLY # Option "USB" "on" # USB ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" # Option "Device" "/dev/input/wacom" # USB ONLY? Option "Device" "/dev/ttyS0" # SERIAL ONLY Option "Type" "eraser" # Option "ForceDevice" "ISDV4" # Tablet PC ONLY # Option "USB" "on" # USB ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "cursor" # Option "Device" "/dev/input/wacom" # USB ONLY? Option "Device" "/dev/ttyS0" # SERIAL ONLY Option "Type" "cursor" # Option "ForceDevice" "ISDV4" # Tablet PC ONLY # Option "USB" "on" # USB ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "pad" # Option "Device" "/dev/input/wacom" # USB ONLY Option "Device" "/dev/ttyS0" # SERIAL ONLY Option "Type" "pad" # Option "USB" "on" # USB ONLY EndSection # Uncomment the following section if you have a TabletPC that supports touch # Section "InputDevice" # Driver "wacom" # Identifier "touch" # Option "Device" "/dev/ttyS0" # SERIAL ONLY # Option "Device" "/dev/input/wacom" # USB ONLY # Option "Type" "touch" # Option "ForceDevice" "ISDV4" # Serial Tablet PC ONLY # Option "USB" "on" # USB ONLY # EndSection
3) Enregistrez (Ctrl+S).
Informations complémentaires
Les informations données ici sont issues du site Ubuntu.org, anglais.
La tablette UD II fonctionne aussi avec un adaptateur série/USB, par exemple avec le TRENDNET TU-S9 (ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port). La seule différence est le remplacement de "/dev/ttyS0" par "/dev/ttyUSB0". (SEG)